The 'Junkster' Pod Racer
+8
TommyKillander
frznlogic
Matt_Public
Stefan E
cas
Azgaron
Stråhatt
tiking
12 posters
Sida 2 av 3
Sida 2 av 3 • 1, 2, 3
Sv: The 'Junkster' Pod Racer
21. I added an extra detail to the Electro attachments on the engines to add more interest to the fuselage. There will be a tiny cable, along with the bigger one, that connects this attachment point with the other smaller one on the pod. For me, the more detail, the better.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
22. So I started working on the fuselage intakes. Nothing too complicated or advanced, but I thought a slick design would work well for this old beast, even though it is an out-dated design and/or engine. I saved about anything that looks it might work for me in any future builds. I am an astmatic, so I have lots of these cannister lying around. I knew one day they will come in handy. I Still contemplating the design aspect of this section of the build. Will have to do more testing on the over all look later. But so far, this is wht I have.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
23. Painting the external intakes on the fuselage.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
24. Added the Electro Attachments to the pod.It's starting to take shape.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
Inte klokt vad snyggt det blir!
Håkan
Håkan
Azgaron- Hedersomnämnande Modell Göteborg 2009
Sv: The 'Junkster' Pod Racer
Hihi! Stor tack Håkan. Det närmare sig. 😆
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
25. The overall look, so far on this pod. I think it is starting to look descent enough. Still contemplating the components surrounding the seating compartment. We'll see if I will use both or one or just leave it off entirely.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
26. The painting is done on the area surrounding the intakes. Will be doing some dry-brushing later on them.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
27. I think the overall look on this old beast is starting to look pleasing to the eyes.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
Heliga dykare!
Den roströda färgen ser precis lagom snabb ut.
Den roströda färgen ser precis lagom snabb ut.
Matt_Public- Master of DNF
Sv: The 'Junkster' Pod Racer
Matt_Public skrev:Heliga dykare!
Den roströda färgen ser precis lagom snabb ut.
Hihi! Tack.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
Så fruktansvärt roligt bygge! Du har fantastisk fantasi och förmåga att göra verklighet av den ☺️
frznlogic
Sv: The 'Junkster' Pod Racer
frznlogic skrev:Så fruktansvärt roligt bygge! Du har fantastisk fantasi och förmåga att göra verklighet av den ☺️
Tack för det. Gillar testa nya grejer.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
TommyKillander skrev:Vilket fantastiskt bygge!
Tommy
Tack Tommy.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
Stråhatt skrev:Strålande vackert, perfekta färger, älskar skrotkänslan!
Tack för det.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
29. The Electro cable that will attach to both the pod and the engine. I used a soldering lead thread is what I used to make the big cable. A thinner steel wire is used to wrap around the bigger cable. THese
will be painted black then dried brush with silver.
will be painted black then dried brush with silver.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
30. The cable attachments. I had the choice of two. The first one and the second version. I choose the second alternative just beacuse of the way it looked.
Alternative 1.
Alternative 2.
Alternative two mounted together and base painted. Will dry brush it before mounting it to the Electro attachments.
The cable will not be glued as I want make any changes if I am not 100% satisfied with the look after mounting it. So there are mount holes at each end that will make it possible to just shove the cable in
the and out it the need arises. This is one of the main reasons I chose to use lead soldering thread as the cable. It makes it possible to pose the cable exactly the way I want it without any movement.
Alternative 1.
Alternative 2.
Alternative two mounted together and base painted. Will dry brush it before mounting it to the Electro attachments.
The cable will not be glued as I want make any changes if I am not 100% satisfied with the look after mounting it. So there are mount holes at each end that will make it possible to just shove the cable in
the and out it the need arises. This is one of the main reasons I chose to use lead soldering thread as the cable. It makes it possible to pose the cable exactly the way I want it without any movement.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
31. I decided use another wire that I found in a dumspters. I simply cut both ends to reveal the copper wire inside. Then I measured the distance between the two Electro attachments and made the cut. I also
wrapped a much smaller wire around the the thicker one. I just thought it would add to the overall look.Then I primed the wires with black charcoal paint and then dried brushed them with silver.
wrapped a much smaller wire around the the thicker one. I just thought it would add to the overall look.Then I primed the wires with black charcoal paint and then dried brushed them with silver.
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
32. Och nu den slut resultat. Lite att puts upp här och där men i princip är det klart. Tror att slut resultat blev ok. Inte den bästa men det duger:
tiking- De slitna lastbilarnas mästare
Sv: The 'Junkster' Pod Racer
Fantastiskt läcker och helt underbar!
Men.... borde det inte sitta en ryttare i podden?
Stefan
Men.... borde det inte sitta en ryttare i podden?
Stefan
Stefan E- Linkebodamannen
Sida 2 av 3 • 1, 2, 3
Sida 2 av 3
Behörigheter i detta forum:
Du kan svara på inlägg i det här forumet